|
|
|
|
Today's coatings require near homogenized mixing.. |
 |
MORE COMPLETE MIXING
Today's high performance coatings require near homogenized mixing, not pushing and paddle stirring. Squirrel Mixers, with their unique mixing cage designs, are the only mixers capable of accomodating this mixing need. Unlike other mixer designs, which move material in the common "splashy" push and paddle way. Squirrel Mixer's unique mixing cage design pulls material from the top and bottom into the centre as in a vortex, resulting in a completely thorough mixture for best painting performance.
INCREDIBLE 18-360 TIMES FASTER
The Squirrel Mixer fully mixes a 4 litre can of latex paint in less than 10 seconds. That's 18-360 time's faster than other mixers. (see chart)
MINIMIZES SPLASHING
Because the Squirrel Mixer is mostly positioned down around the centre of the container and draws material from both top and bottom, there is little opportunity for troublesome splashing common with other mixers.
DOESN'T DAMAGE CONTAINERS
The round cage design of the Squirrel Mixer ensures there is none of the container damage ussually associated with other power drill mixers - even when shoved against the containers sides.
USE WITH MANY MATERIALS
Squirrel's Mixers provide unmatched mixing performance in a wide range of materials including food, paints, stains, varnishes, wall textures including plaster, epoxies, joint compounds, adhesives, soaps/lotions, curing solutions, marine coatings and much more.
VERY DURABLE
PolyPro and ProSteel Squirrel Mixer modules have a solid-core rust proof steel shaft. The mixer cage of the PolyPro models is made of tough durable polypropylene. The ProSteel model has a strong steel mixer cage. The Stainless models have a stainless steel shaft and stainless steel cage.
EASY TO CLEAN
The Squirrel Mixers are very easy to clean. Right after mixing place in cleaning solution (water or solvent). Spin the mixer (both directions if reversable drill is used). In the case of solid compounds allow to dry then beat mixer on the ground to shake off the material. For plaster etc., when using ProSteel unit, torching the dried remnants will also prove effective.
|
